Since the release of the Bicsi based Modified One Connector Permanent Link, the TIA has released the Modular Plug Terminated Link (MPTL). The MPTL model is more useful as it uses a Patch Cord Adapter to test the field installed modular plug. Details are available through this KB:
自從BICSI發布了修改型一連接器永久鏈接以來，TIA已經發布了模塊化插頭終端鏈接（MPTL）。MPTL模型更有用，因?yàn)樗褂靡粋€接插適配器來測試現場安裝的模塊化插頭。
Modular Plug Terminated Link (MPTL) Test Limits for DSX-5000 and DSX-8000
The following information is prior to TIA?MPTL release:
以下信息是TIA MPTL發布之前的信息：
With the?DSX-5000 CableAnalyzer, it is possible to?test a link when the?far end of the cable has been?terminated with a RJ45 plug.
使用DSX-5000電纜認證分析儀，當電纜的遠端用RJ45插頭時，可以使用一條永久和一個通道進行測試。
Testing this to obtain a warranty from a cabling vendor? You should consult with them on their requirements, since they are issuing the warranty and not Fluke Networks. Their word is final.
這個測試是否一樣可以獲得布線供應商的保修服務？你應該去咨詢布線供應商是否可行，因?yàn)槭撬麄兲峁┊a(chǎn)品保修，而不是福祿克網絡。
BICSI recognizes this style of link and certain standards bodies are looking to define this link definition.
BICSI承認這種鏈接模式，并且某些標準機構正在尋找定義這個鏈接定義。
Connect the DSX-5000 CableAnalyzer as shown?below. The main unit?must be at the patch panel end.
福祿克DSX-5000連接圖如下：永久鏈路必須在主機端。
Selecting the test limit:
測試標準的選擇：
- Tap the test limit from the?HOME SCREEN > EDIT > Test Limit > MORE
- 主頁 -點擊屏幕-點擊編輯-測試標準-更多
- Slide down to?Application and tap to see:
- 選擇應用標準ons are available. Cat 5e,?Cat 6 Cat 6A and the (+All) options which adds?ELTCTL,?TCL,?Resistance Unbalance within a pair,?Resistance Unbalance between pairs,?CMRL and?CDNEXT measurements.
- Tap?SAVE > USE SELECTED.
Unlike the DTX CableAnalyzer, this will not complain/warn about a Permanent Link adapter being mixed with a Channel Adapter. If you get a message indicating the?patch cord at the far end is bad, it means you have failed to maintain the twists in the cable entering the back of the RJ45 plug. You will need to re-terminate the RJ45 plug.